Seeker "HEAT SHIELD" Brake pad shim

■ Compatible model (for each model)
FK8 CIVIC TYPE-R Front (genuine Brembo caliper) Part number: 12800-FK8-00F
FD2 CIVIC TYPE-R Front (genuine Brembo caliper) Part number: 12800-FD2-00F
DC5 INTEGRA TYPE- For R Front (genuine Brembo caliper) Part number : 12800-FD2-00F

It is a brake pad shim with a special ceramic coating on both sides of the stainless steel sheet.
It was developed to protect the brake calipers from the heat damage of the brake pads.
Although this ceramic coating is extremely thin, it has an excellent heat insulating effect, and it has been confirmed that the temperature is reduced by about 10% or more when used without this product. * In-house measured value

■ By reducing the temperature on the brake caliper side, the burden on the caliper and brake fluid can be reduced, and the effect of extending the life of each can be expected.

■ This product uses only hard materials in consideration of the effect on the brake touch. The thickness is as thin as about 1.0 mm.

■ If the coated surface is deteriorated (peeled, etc.) or the shim itself is deformed, it will be a guide for replacement. Basically, you can use it repeatedly until deterioration can be confirmed.


* Be sure to remove the genuine pad shim before use.
* The brake pads in the image are not included.
* Although it can be used for external brake pads, it may not be possible to install it if the shape and thickness of the pads are significantly different from the genuine products. (Be sure to check if there is any drag or abnormal noise after mounting, and stop using it if any abnormality is found.)
* FF vehicles are lined up only at the front.