HPI EVOLVE SIDE TANK OILCOOLER KIT

EVOLVE SIDE TANK OILCOOLER KIT FOR Z34

● An integrated O / C kit with a Z34 dedicated under panel that uses the side tank oil cooler W5, which boasts the maximum capacity.
● By mounting the oil cooler core horizontally and guiding the air independently without overlapping the radiator, it is possible to cool not only the oil temperature but also the water temperature more efficiently.
* Recommended for use with EVOLVE radiator kit
● A duct has been installed to allow the hot air in the engine room to escape from below, and a lid has also been installed near the drain and element to facilitate oil change work.
● Estimated amount of engine oil injection: 7L
● Under panel material: FRP

EVOLVE SIDE TANK OILCOOLER KIT FOR Z33

● The side tank oil cooler W5, which boasts the maximum capacity, is used for the upper and lower air ducts.
● Similar to Z34, the oil cooler core is mounted horizontally, and by guiding the air independently without overlapping the radiator, highly efficient cooling is possible due to both water temperature and oil temperature.
* Recommended for both EVOLVE radiator and rescue
● Dedicated aluminum baffle plate included
● Estimated amount of engine oil injection: 6.5L

GXPA16 EVOLVE SIDE TANK OIL COOLER KIT FOR GR YARIS

● The W5 core, which is the largest HPI size, is boldly laid out in the front grille!
● The running wind is taken in from the grill, the oil is cooled through the core, and the running wind is exhausted to both sides by using the unevenness of the rain hose.
● By adopting the maximum O / C core, the maximum cooling performance is demonstrated against the high calorific value of GR Yaris.
● By combining AN10 Banjo and a thin plug, it can be installed in a small space and with a minimum of processing.
● Install the oil cooler with the radiator front bolt-on.

For compatibility check please visit the below HPI webpage
HPI EVOLVE SIDE TANK OILCOOLER KIT