326 Power - O-R.C.A - ALPHARD/VELLFIRE 30

326 Power - O-R.C.A - ALPHARD/VELLFIRE 30

Set model: ALPHARD / VELLFIRE 30 (for front)

● Lower arm correction approx. 35 mm
● Caster correction approx. 5 mm
● Camber angle (about -2 degrees)

Attach a roll center adapter to suppress the amount of roll
Prevent interference between tires and fenders for a comfortable drive ♪

☆ What is a roll center !? ☆
I think that there are many people who have heard the word "roll center" but do not understand it.
You may be told that you still don't understand even if you read what you're writing from now on ... (laughs)

The roll center is the center when the car rolls, and there are three suspension points.
The point where the center of the contact patch of the tire is connected from the intersection connecting the joint points, and the point where the line and the center line of the vehicle body intersect is It is a roll center.

It is said that the closer the center of gravity of the vehicle is to the position of the roll center, the less roll there is.
Even if it is genuine, if the vehicle height is lowered even though the center of gravity of the vehicle and the roll center are separated
The more you drop it, the farther away it is, and the more you roll it.

That's where the roll center adapter comes in!

The joint point of the suspension is corrected by using the roll center adapter.
Although the vehicle height is low, the roll center can be closer to the center of gravity.

Furthermore, the vehicle height can be reduced by the thickness of the adapter. (* Depends on the model (shape of the suspension))

Our "Oni Can R.C.A" can not only correct the roll center but also make it an Oni Can.
You can even correct the tire position (correction of casters) that has deviated from the center of the fender arch !!

By installing the roll center adapter ...
● Reduction of roll amount
● Prevents interference between fenders and tires as the amount of roll decreases
● Improved ride comfort
● For demon can specifications (* When demon can R.C.A is installed)
● Correction of the positional relationship between the fender and the tire (* when the Onikan R.C.A is installed)
● Further reduction in vehicle height (* depending on vehicle type)

It's a part you definitely want to put in a Shakotan car !!

* As this is a competition-only part, please do not use it on public roads.
* If you do not extend the tie rod end, you will not be able to set it.