GT-1 Motor Sports BLACK Spacer type T 17.5mm

A brand that seeks [Commitment] and [Strongest] from GT-1 motor sports It is a wide tread spacer of [Black_Series].
We have a line-up of thickness "17.5 mm" that is unique from the type for external wheels so far.
◆Outer diameter 159mm/PCD114.3-5H/M12-P1.5　
φ60-φ73 17.5mm
In addition, to prevent rust and stains, we applied "Black Anodized Aluminum" to the product to ensure its appearance and corrosion resistance.
Wide tread spacer using domestically produced high-strength duralumin A2017S.
The color is black anodized with excellent corrosion resistance.
For Toyota vehicles, the vehicle side hub center diameter Φ60 and wheel side hub diameter Φ73 are machined in one piece, so you can minimize the shake of the steering wheel.
If you are installing an external wheel on Toyota, it can be perfectly handled when the car side hub diameter is Φ60 and the external wheel hub diameter is Φ73.
In addition, it is possible to install it on vehicles that had a grease cap on the front hub and could not install a spacer with a hub center, as long as it is equipped with an aftermarket wheel of φ73 and a hub diameter.
This wide tread spacer cuts out the hub center as an integral type, so you can minimize the shake of the steering wheel by putting it on.
The included special nut is designed so that it does not protrude from the spacer surface, but the vehicle side hub bolt may protrude from the spacer surface. In this case, please note that it cannot be installed if there is no relief on the wheel mounting surface. Also, please note that there are extremely rare wheels with a center hub diameter of Φ72.5.

For more details please go through the below link...
GT-1 Motor Sports BLACK Spacer type T 17.5mm